#!/bin/sh

set -x

DISABLE_FW_UPGRADE="false"

HOSTNAME="WCV3"

ENABLE_USB_ETH="false"

ENABLE_USB_DIRECT="false"
USB_DIRECT_MAC_ADDR="02:01:02:03:04:08"

REMOTE_SPOTLIGHT="false"
REMOTE_SPOTLIGHT_HOST="0.0.0.0"

RTSP_ENABLED="false"
RTSP_ENABLE_AUDIO="false"

ENABLE_IPV6="false"

DEBUG_ENABLED="false"
#drops you to a shell via serial, doesn't load app_init.sh

#####################################
##########CONFIG END#################
#####################################

echo  "run_mmc.sh start" > /dev/kmsg

swap_enable() {
        if [[ -e /media/mmc/wz_mini/swap ]]; then
                echo "swap exists, enable"
                swapon /media/mmc/wz_mini/swap
        else
                echo "swap missing, system stability with usb potentially comprimised"
        fi
}

if [[ "$ENABLE_IPV6" == "true" ]]; then
echo "ipv6 enabled"
else
echo "ipv6 disabled"
sysctl -w net.ipv6.conf.all.disable_ipv6=1
fi

if [[ "$ENABLE_USB_ETH" == "true" ]]; then

	swap_enable

        ifconfig eth0 down
        ifconfig wlan0 down

        /media/mmc/wz_mini/bin/busybox ip link set wlan0 name wlanold
        /media/mmc/wz_mini/bin/busybox ip addr flush dev wlanold
        /media/mmc/wz_mini/bin/busybox ip link set eth0 name wlan0

        ifconfig wlan0 up
	pkill udhcpc
        udhcpc -i wlan0 -x hostname:$HOSTNAME -p /var/run/udhcpc.pid -b
#        sleep 5
        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
	else
	        echo "usb ethernet disabled"
fi

if [[ "$ENABLE_USB_DIRECT" == "true" ]]; then
	##ONLY WORKS WITH g_ethernet enabled kernel
        ifconfig usb0 down
        ifconfig wlan0 down
        /media/mmc/wz_mini/bin/busybox ip link set wlan0 name wlanold
        /media/mmc/wz_mini/bin/busybox ip addr flush dev wlanold
        /media/mmc/wz_mini/bin/busybox ip link set usb0 name wlan0
	/media/mmc/wz_mini/bin/busybox ip link set wlan0 address $USB_DIRECT_MAC_ADDR

        ifconfig wlan0 up
	pkill udhcpc
        udhcpc -i wlan0 -x hostname:$HOSTNAME -p /var/run/udhcpc.pid -b
        sleep 5
        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
	else
		echo "usb direct disabled"
fi

if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
	mkdir /tmp/Upgrade
	mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
	echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /opt/wz_mini/tmp/.storage/hosts
	mount --bind /opt/wz_mini/tmp/.storage/hosts /etc/hosts
else
        mkdir /tmp/Upgrade
        /opt/wz_mini/bin/busybox inotifyd /opt/wz_mini/usr/bin/watch_up.sh /tmp/Upgrade:n &
fi

if [[ "$REMOTE_SPOTLIGHT" == "true" ]]; then
	{ sleep 10; /media/mmc/wz_mini/bin/socat pty,link=/dev/ttyUSB0,raw tcp:$REMOTE_SPOTLIGHT_HOST:9000; } &

fi

if [[ "$RTSP_ENABLED" == "true" ]]; then
	swap_enable
        mkdir /tmp/alsa
        cp /media/mmc/wz_mini/etc/alsa.conf /tmp/alsa

        if [[ "$RTSP_ENABLE_AUDIO" == "true" ]]; then
                LD_LIBRARY_PATH=/media/mmc/wz_mini/lib /media/mmc/wz_mini/bin/v4l2rtspserver -C 1 -a S16_LE  /dev/video1,hw:Loopback,0 &
        else
                echo "rtsp audio disabled"
                LD_LIBRARY_PATH=/media/mmc/wz_mini/lib /media/mmc/wz_mini/bin/v4l2rtspserver -s /dev/video1 &
        fi
        else
        echo "rtsp disabled"
fi

echo "set hostname"
hostname $HOSTNAME

sleep 3

#################################################
##############CUSTOM BEGIN#######################
#################################################

#Place commands here to run 30 seconds after boot
#such as mount nfs, ping, etc

#mount -t nfs -o nolock,rw,noatime,nodiratime 192.168.1.1:/volume1 /media/mmc/record &