Wyze-Firmware/SD_ROOT/wz_mini/etc/init.d/S10kmod

#!/bin/sh

source /opt/wz_mini/etc/rc.common
source /opt/wz_mini/wz_mini.conf

set -x 

## REPLACE STOCK MODULES
if [[ "$ENABLE_RTL8189FS_DRIVER" == "true" ]] || [[ "$ENABLE_RTL8189FS_DRIVER" == "" ]]; then
        echo "Enable 8189fs"
        if [ -f /opt/wz_mini/tmp/.WYZEC1-JZ ]; then
                sed -i 's/\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
        elif [ -f /opt/wz_mini/tmp/.WYZECP1_JEF ]; then
                sed -i 's/insmod \/driver\/8189es.ko/insmod \/opt\/wz_mini\/lib\/modules\/3.10.14\/extra\/8189es.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
        elif [ -f /opt/wz_mini/tmp/.WYZE_CAKP2JFUS ]; then
                sed  -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g'  /opt/wz_mini/tmp/.storage/app_init.sh
        elif [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
                sed  -i 's/\/system\/driver\/rtl8189ftv.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/8189fs.ko rtw_power_mgnt=0 rtw_enusbss=0 rtw_drv_log_level=0/g'  /opt/wz_mini/tmp/.storage/app_init.sh
        fi
fi

if [[ "$ENABLE_ATBM603X_DRIVER" == "true" ]] || [[ "$ENABLE_ATBM603X_DRIVER" == "" ]]; then
	echo "Enable atbm603x_wifi_sdio"
        if [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
		sed -i 's/\/thirdlib\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
	elif [ -f /opt/wz_mini/tmp/.T31 ] && ! [ -f /opt/wz_mini/tmp/.ATOM_CamV3C ]; then
		sed -i 's/\/system\/driver\/atbm603x_wifi_sdio.ko/\/opt\/wz_mini\/lib\/modules\/3.10.14\_\_isvp_swan_1.0\_\_\/extra\/atbm603x_wifi_sdio.ko atbm_printk_mask=0/g' /opt/wz_mini/tmp/.storage/app_init.sh
	fi
fi

#Enable serial driver for car
if [ -f /opt/wz_mini/tmp/.CAR ] || [[ "$ENABLE_CAR_DRIVER" == "true" ]]; then
        modprobe cp210x
fi

#RTSP SERVER
if ([[ "$RTSP_HI_RES_ENABLED" == "true" ]] || [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]) && ! [[ -e /tmp/dbgflag ]]; then
	if [[ "$RTSP_LOW_RES_ENABLED" == "true" ]] && [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
	        if [ -f /opt/wz_mini/tmp/.T20 ]; then
		        echo "load video loopback driver at video6 video7"
		        insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6,7
		else
		        echo "load video loopback driver at video1 video2"
		        insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1,2
		fi
	elif [[ "$RTSP_LOW_RES_ENABLED" == "true" ]]; then
	        if [ -f /opt/wz_mini/tmp/.T20 ]; then
		        echo "load video loopback driver at video7"
		        insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=7
		else
		        echo "load video loopback driver at video2"
	        	insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=2
		fi
	elif [[ "$RTSP_HI_RES_ENABLED" == "true" ]]; then
	        if [ -f /opt/wz_mini/tmp/.T20 ]; then
		        echo "load video loopback driver at video6"
		        insmod /opt/wz_mini/lib/modules/3.10.14/extra/v4l2loopback_V2.ko video_nr=6
		else
		        echo "load video loopback driver at video1"
		        insmod /opt/wz_mini/lib/modules/3.10.14__isvp_swan_1.0__/extra/v4l2loopback.ko video_nr=1
		fi
	fi
fi


if [[ "$ENABLE_NFSv4" == "true" ]]; then
        insmod $KMOD_PATH/kernel/lib/oid_registry.ko
        insmod $KMOD_PATH/kernel/net/dns_resolver/dns_resolver.ko
        insmod $KMOD_PATH/kernel/fs/nfs/nfsv4.ko
        insmod $KMOD_PATH/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
        echo nfsv4 enabled
else
        echo nfsv4 disabled
fi

if [[ "$ENABLE_IPTABLES" == "true"  ]]; then

        insmod $KMOD_PATH/kernel/net/netfilter/x_tables.ko
        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ip_tables.ko
        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/ipt_REJECT.ko
        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_filter.ko
        insmod $KMOD_PATH/kernel/net/ipv4/netfilter/iptable_mangle.ko
        echo "iptables ipv4 enabled"

        if [[ "$ENABLE_IPV6" == "true" ]]; then
                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6_tables.ko
                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_filter.ko
                insmod $KMOD_PATH/kernel/net/ipv6/netfilter/ip6table_mangle.ko
                echo "iptables ipv6 enabled"
        fi
else
        echo "iptables disabled"
fi

if [[ "$ENABLE_WIREGUARD" == "true" ]]; then
        insmod $KMOD_PATH/kernel/net/ipv4/tunnel4.ko
        insmod $KMOD_PATH/kernel/net/ipv4/ip_tunnel.ko
        insmod $KMOD_PATH/kernel/net/wireguard/wireguard.ko
fi

if [[ "$ENABLE_CIFS" == "true" ]]; then
        insmod $KMOD_PATH/kernel/fs/cifs/cifs.ko
else
        echo "cifs disabled"
fi

if [[ "$ENABLE_USB_STORAGE" == "true" ]]; then
        insmod $KMOD_PATH/kernel/drivers/scsi/scsi_mod.ko
        insmod $KMOD_PATH/kernel/drivers/scsi/sd_mod.ko
        insmod $KMOD_PATH/kernel/drivers/usb/storage/usb-storage.ko
else
        echo "usb_storage disabled"
fi

if [[ "$ENABLE_EXT4" == "true" ]]; then
        if [ -f /opt/wz_mini/tmp/.T20 ]; then
        insmod $KMOD_PATH/kernel/lib/crc16.ko
        fi

        insmod $KMOD_PATH/kernel/fs/jbd2/jbd2.ko
        insmod $KMOD_PATH/kernel/fs/mbcache.ko
        insmod $KMOD_PATH/kernel/fs/ext4/ext4.ko
fi

echo "bonding kernel module setup"
if [[ "$BONDING_ENABLED" == "true" ]]; then
	if [[ "$BONDING_LINK_MONITORING_FREQ_MS" == "" ]]; then
        	BONDING_LINK_MONITORING_FREQ_MS="100"
	fi
	if [[ "$BONDING_DOWN_DELAY_MS" == "" ]]; then
            BONDING_DOWN_DELAY_MS="5000"
        fi
        if [[ "$BONDING_UP_DELAY_MS" == "" ]]; then
            BONDING_UP_DELAY_MS="5000"
        fi
        if [[ "$BONDING_PRIMARY_INTERFACE" == "" ]]; then
            BONDING_PRIMARY_INTERFACE="eth0"
        fi
        if [[ "$BONDING_SECONDARY_INTERFACE" == "" ]]; then
            BONDING_SECONDARY_INTERFACE="wlan0"
        fi
        if [[ "$BONDING_FAIL_OVER_MAC" == "" ]]; then
            BONDING_FAIL_OVER_MAC="0"
        fi

	# Insert the bonding driver into the kernel
	insmod $KMOD_PATH/kernel/drivers/net/bonding/bonding.ko mode=active-backup miimon="$BONDING_LINK_MONITORING_FREQ_MS" downdelay="$BONDING_DOWN_DELAY_MS" updelay="$BONDING_UP_DELAY_MS" primary="$BONDING_PRIMARY_INTERFACE" fail_over_mac="$BONDING_FAIL_OVER_MAC"
fi