Wyze-Firmware/SD_ROOT/wz_mini/run_mmc.sh

#!/bin/sh

DISABLE_FW_UPGRADE="false"
HOSTNAME="WCV3_spare_test"

echo  "run_mmc.sh start" > /dev/kmsg

echo "check if ethernet adapter is present"
 if [[ ! -d /sys/class/net/eth* ]]; then
        echo "usb ethernet not present"
	if [[ ! -d /sys/class/net/usb0* ]]; then
        	echo "usb host not present"
	else
	##ONLY WORKS WITH g_ethernet enabled kernel
        ifconfig usb0 down
        ifconfig wlan0 down
	/media/mmc/wz_mini/bin/busybox ip link set wlan0 address 02:01:02:03:04:08
        /media/mmc/wz_mini/bin/busybox ip link set wlan0 name wlanold
        /media/mmc/wz_mini/bin/busybox ip link set usb0 name wlan0

        ifconfig wlan0 up
        udhcpc -i wlan0
        /media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m &
        sleep 5
        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
	fi
    else
        ifconfig eth0 down
        ifconfig wlan0 down

        /media/mmc/wz_mini/bin/busybox  ip link set wlan0 name wlanold
        /media/mmc/wz_mini/bin/busybox  ip link set eth0 name wlan0

        ifconfig wlan0 up
        udhcpc -i wlan0
        /media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m &
        sleep 5
        mount -o bind /media/mmc/wz_mini/bin/wpa_cli.sh /bin/wpa_cli
    fi

if [[ "$DISABLE_FW_UPGRADE" == "true" ]]; then
	mkdir /tmp/Upgrade
	mount -t tmpfs -o size=1,nr_inodes=1 none /tmp/Upgrade
	echo -e "127.0.0.1 localhost \n127.0.0.1 wyze-upgrade-service.wyzecam.com" > /tmp/hosts_wz
	mount --bind /tmp/hosts_wz /etc/hosts
fi

echo set hostname
hostname $HOSTNAME

echo Run dropbear ssh server
/media/mmc/wz_mini/bin/dropbearmulti dropbear -R -m

sleep 3

#Place commands here to run 30 seconds after boot
#such as mount nfs, ping, etc

#mount -t nfs -o nolock,rw,noatime,nodiratime 192.168.1.1:/volume1 /media/mmc/record